Whiteline Performance Rear Axle Control Arm Lower Rear - Outer Bushing Kit W62535 - 350Z / 370Z
Awaiting stock, shipping soon
Regular price
$81.29
Sale price
$81.29
Regular price
Unit price
per
Tax included.
Shipping calculated at checkout.
Couldn't load pickup availability
- Fully secure checkout
- Trusted
- Rated and reviewed
Question about this product?
We're happy to help.
Whiteline Performance Rear Axle Control Arm Lower Rear - Outer Bushing Kit - 350Z & 370Z
W62535
The rear outer bushing on the rear lower control arm sits right at the hub, it's the final link between the arm and the wheel. When it wears, rear toe and camber shift under load and the car loses the sharp, predictable responses it once had. The Whiteline W62535 restores that precision with advanced synthetic elastomer built to hold geometry firmly through every driving condition.
The outer rear position is one of the highest-load bushing locations on the Z platform. It takes the full brunt of lateral forces through corners — and when it goes soft, the rear end follows.
Engineered specifically for the rear axle lower control arm rear outer position across the 350Z, 370Z, and related Nissan and Infiniti platforms, this kit delivers Whiteline's hallmark balance: a compliant, quiet ride at low loads with genuine firmness and geometry control under cornering, braking, and acceleration. Backed by a lifetime warranty.
Bush specifications
Outer diameter
36.5 mm
Shell OD (A)
Inner diameter
19 mm
ID (B)
Length
50.5 mm
Body length (C)
Tube size: 19 x 12.2 x 49.5mm · Position: rear axle, lower control arm, rear outer (hub / spindle side)
Kit contents
Shell bushings
2x · Type 16 synthetic elastomer
Tubes
2x · 19 x 12.2 x 49.5mm
LM grease
Molybdenum disulphide — included
Installation guide
Included
What it does for your car
- Restores rear geometry at the hub, eliminates lateral compliance that causes toe and camber drift under load
- Sharper, more predictable rear-end feel through corners and direction changes
- Improved braking stability, rear tracks straight and resists deflection under hard stops
- Reduced uneven rear tyre wear caused by hub-side geometry shift
- Synthetic elastomer is compliant at low loads, firms up under cornering and braking pressure
- Superior resistance to oil, grease, ozone, and weathering vs OEM rubber
- Internal grease reservoirs for continual self-lubrication, quiet and maintenance-free
- Specially bonded design optimised for high lateral load-bearing applications
Installation
Estimated time
~2 hours
Difficulty
DIY — specialist tools needed
Wheel alignment
Required after fitment
Press tool required. Bushing installation requires a press. Whiteline recommends using the WTK001 Press In/Out Kit with the specified sleeves and plates for correct fitment (M12 threaded rod). Professional installation recommended if you don't have access to a press.
Fitment
• Nissan 350Z Z33 · 2003–2009 (all variants)
• Nissan 370Z Z34 · 2009–2020 (all variants)
• Nissan Z RZ34 · 2022+
• Infiniti G35 · 2002–2007
• Infiniti G37 · 2008–2013
• Nissan Skyline V35 · 2001–2007
• Nissan Skyline V36 · 2006–2015
Best paired with W63626 (rear lower rear inner) for a complete rear lower arm rebuild at the rear position. Replace both while the arm is off to save labour and restore the full assembly to spec. Combine with W62999 (front outer) for a total rear lower control arm refresh across all bushing positions.
